ADDITIVES FOR POWDER COATINGS
HMTaddtive-050F
|
MELTING POINT（ ℃ ） |
DENSITY（g/cm3） |
VISCOSITY（mpa.s 140°C） |
PACKAGING ( KG ) |
HOW TO USE |
|
110 |
0.95-0.97 |
9-25 |
25（COMPOUND BAG） |
IT CAN BE ADDED IN ANY STEPS. THEN IT SHOULD BE DISPERSED HOMOGENEOUSLY. |
FEATURES AND APPLICATIONS
IT IS FISCHER TROPSCH WAX WITH GOOD LEVELLING ABILITY AND SCRATCH RESISTANCE. IT WILL NOT PRODUCE THE SMOKE. IT IS HIGHLY RECOMMENDED IN THE APPLICATION OF POWDER COATINGS.
USAGE AMOUNT（%）
THE RECOMMENDED ADDITION AMOUNT IS 0.5-1.5% OF THE TOTAL QUANTITY OF THE FORMULA. YOU CAN CHOOSE THE OPTIMUM AMOUNT ACCORDING TO DIFFERENT PRACTICAL NEEDS.
HMTaddtive-060F
|
MELTING POINT（ ℃ ） |
PENETRATION DEGREE（10-1mm） |
AVERAGE PARTICLE SIZE（μm） |
PACKAGING ( KG ) |
HOW TO USE |
|
120 |
＜1.0 |
4-6 |
20（COMPOUND BAG） |
IT CAN BE ADDED IN ANY STEPS. THEN IT SHOULD BE DISPERSED HOMOGENEOUSLY. |
FEATURES AND APPLICATIONS
IT IS A KIND OF MICRONIZED FISCHER TROPSCH WAX WITH EVENLY DISTRIBUTED MOLEULAR WEIGHT. IT HAS LITTLE EFFECT ON THE GLOSS AND GOOD DISPERSIBILITY. IT IS RECOMMENDED IN THE APPLICATION OF INDUSTRIAL PAINT, WAX FOR POWDER COATINGS AND OFFSET PRINTING INK. IT IS VERY COST-EFFECTIVE.
USAGE AMOUNT（%）
THE RECOMMENDED ADDITION AMOUNT IS 0.5~1.0% OF THE TOTAL QUANTITY OF THE FORMULA. PLEASE CHOOSE THE OPTIMUM AMOUNT ACCORDING TO DIFFERENT PRACTICAL NEEDS.
HMTaddtive-830
|
FREEZING POINT °C |
CONTENT % |
IODINE VALUE |
PACKAGING ( KG ) |
|
60.0-70.0 |
≥90% |
gI2/100g≦4.0 |
25（COMPOUND BAG） |
APPLICATIONS
IT IS A KIND OF NON-TOXIC PLASTICIZER, ANTI-AGING AGENT AND FOAMING AGENT WIDELY USED FOR THE MANUFACTURE OF POWDER CATINGS. IT EFFECTIVELY IMPROVES THE FLEXIBILITY, PLASTICITY AND ANTISTATIC PROPERTY OF THE PRODUCT.
FEATURES
IT IS A KIND OF WHITE POWDER SUBSTANTIALLY FREE OF IMPURITIES.IT IS INSOLUBLE IN WATER AND SOLUBLE IN ALCOHOL, BENZENE AND ACETONE. IT WILL BE EMULSIFIED TO SOLID WATER-BORNE POLYMER DISPERSION WHEN SHAKED INTENSELY WITH HOT WATER. HLB VALUE OF THE ONE WITH 90% MONOSTEARIN IS 3.9-5.3. IT IS A KIND OF MULTIPURPOSE EMULSIFIER WHICH IS A SAFE INTERNATIONALLY RECOGNIZED FOOD ADDITIVE WITHOUT LIMITED APPLICATION AMOUNT IN FDA.
HMTaddtive-2500
|
GLASS TRANSITION TEMPERATURE °C |
ACID VALUE（mg/gKOH） |
APPEARANCE |
PACKAGING ( KG ) |
|
125 |
285 |
PARTICLE MATTER OR POWDER |
25 |
APPLICATIONS
IT IS A REACTION TYPE OF MATTING AGENT FOR POWDER COATINGS. IT IS APPLICABLE TO THE TRANSPARENT AND MATTE POWDER COATINGS.
FEATURES
IT IS MATTE BLACK WITHOUT BLEACHING. IT HAS GOOD SCRATCH RESISTANCE.
HMTaddtive-7600
|
MELTING POINT（ ℃ ） |
ACID VALUE（mg/gKOH） |
AMINE VALUE（mg/gKOH） |
PACKAGING ( KG ) |
|
141.5-146.5 |
≤7.5 |
≤2.5 |
25 |
APPLICATIONS
IT IS APPLIED IN DEFOAMING PROGRESS WHEN USING THE POWDER COATINGS, CAST IRON AND ALUMINIUM MATERIAL.
FEATURES AND APPLICATIONS
ADDITION AMOUNT VARIES ACCORDING TO THE QUANTITY OF PIGMENT FILLERS. ADDITION QUANTITY OF THE DEFOAMER: 0.5～5% OF THE FILLER QUANTITY.
HMTaddtive 260
|
PRODUCT CATEGORY |
MELTING POINT（ ℃ ） |
ACID VALUE（mg/gKOH） |
APPERANCE |
PACKAGING ( KG ) |
|
ANTIOXIDANTS |
160-180°C |
≤1.0 |
POWDER WITH SLIGHT ODOR |
25 |
APPLICATIONS
IT IS USUALLY NOT USED SEPARATELY. IT IS WIDELY USED IN THE APPLICATIONS OF MACROMOLECULAR MATERIALS SUCH AS PE, PP, PS, POLYAMIDE, POLYCARBONATE AND ABS AFTER MIXING WITH PHENOLIC ANTIOXIDANTS.
FEATURES
IT IS A KIND OF ORGANIC PHOSPHITE ESTER WITH HIGH PERFORMANCE. IT HELPS TO PREVENT DISCOLORATION OF POLYMERS. DEGRADATION RATE OF THE POLYMERS CAN BE LOWERED. THE PERFORMANCE OF GAS FADING RESISTANCE OF RESIN CAN BE IMPROVED.
HMTaddtive 9200
|
PRODUCT CATEGORY |
MELTING POINT（ ℃ ） |
PARTICLE SIZE (μm) |
APPERANCE |
PACKAGING ( KG ) |
|
ANTI-SCRATCH AGENTS |
320°C |
D50:4,D99:10 |
WHITE POWDER |
25 |
APPLICATIONS
IT MAKES THE ALUMINIUM-FOIL PAPER EASY TO BE SHREDDED.
FEATURES
IT IS PURE PTFE WAX, WHICH CAN SIGNIFICANTLY IMPROVE THE ANTI-SCRATCH PROPERTY, ABRASION RESISTANCE AND SMOOTHNESS OF THE COAT.
